collapse

Author Topic: Custom speargun thread exposed  (Read 1067 times)

Offline Kidfreediver

  • Member
  • *
  • Posts: 43
  • "Slippery when wet"
Custom speargun thread exposed
« on: October 27, 2015, 01:49:27 PM »
Thought I start a thread for the diy. These are some of the guns I have built over the years. Hoping for some input and knowledge. Love to see ur custom guns or add ons/ parts.
« Last Edit: October 27, 2015, 01:53:47 PM by Kidfreediver »

Offline Kidfreediver

  • Member
  • *
  • Posts: 43
  • "Slippery when wet"
Re: Custom speargun thread exposed
« Reply #1 on: October 27, 2015, 01:55:44 PM »
Pics

Offline chopper

  • Member
  • *
  • Posts: 155
Re: Custom speargun thread exposed
« Reply #2 on: October 27, 2015, 04:19:00 PM »
Hey Jake,

Following up from the other thread -- how did you cut the hole in the blank for the carbon barrel? I've read on other build threads about cutting the blank in half lengthwise and using the appropriate size ball head bit to route out the barrel hole -- half on each half -- and then epoxying the two halves back together. Anyway here's my second build -- a 34" mid-handle.

Cheers,
Brad




Offline Kidfreediver

  • Member
  • *
  • Posts: 43
  • "Slippery when wet"
Re: Custom speargun thread exposed
« Reply #3 on: October 27, 2015, 05:20:38 PM »

Hey Jake,

Following up from the other thread -- how did you cut the hole in the blank for the carbon barrel? I've read on other build threads about cutting the blank in half lengthwise and using the appropriate size ball head bit to route out the barrel hole -- half on each half -- and then epoxying the two halves back together. Anyway here's my second build -- a 34" mid-handle.

Cheers,
Brad



I use a hole saw at the end free hand

Offline Fej

  • Member
  • *
  • Posts: 257
Re: Custom speargun thread exposed
« Reply #4 on: October 30, 2015, 11:27:32 AM »
Nice hybrids. Is that bottom gun made of redwood?
Jeff

Offline Kidfreediver

  • Member
  • *
  • Posts: 43
  • "Slippery when wet"
Re: Custom speargun thread exposed
« Reply #5 on: October 30, 2015, 11:45:25 AM »

Nice hybrids. Is that bottom gun made of redwood?
It's a king wood. Hard like teak

Offline bluedvr

  • Member
  • *
  • Posts: 3
  • Displaced kala killer
Re: Custom speargun thread exposed
« Reply #6 on: June 12, 2018, 02:23:41 PM »
Those are bad ass are you open to orders?

 

noob spearo podcast

THE SPEAR Spearfishing Podcast

Support the NCUWH Website

Help support the NorCal Underwater Hunters Website by donating today.

Your decision to contribute is strictly voluntary. If you see value in this website: meeting new dive buddies, posting dive reports, a place to post your pictures, sharing great fish stories, plan out of town hunting trips, etc..., then please contribute. All proceeds go towards supporting the costs to host and maintain this awesome website.

If you prefer to send a check or money order, please PM me, MATT MATTISON, for the address.

Thanks!
Matt